Arcadia Sliding Glass Doors Replacement Parts and Services

A Guide to Maintaining your Sliding Glass Door

Posted by on Jul 16, 2017

A Guide to Maintaining your Sliding Glass Door

A hard to open sliding glass door usually means that it is in need of maintenance. As many homeowners know, regular house maintenance is vital. After all, aside from being a vital design piece, your sliding glass door is there to serve a specific purpose. You should not let it get to the point when the door would barely budge. This article provides readers with a basic guide on how to properly maintain and adjust a sliding door to ensure that is running as smoothly as it should.

Getting the Necessary Supplies

Before embarking on this project, it is vital that you get the right tools for the job. After all, it will require more than a bit of elbow grease. It will also require a bit of finesse and some basic skills, so be forewarned. That being said, do yourself a favor and make sure that you get all the supplies presented below. These should make the job that much easier.

  • Wire Brush
  • WD-40
  • Lubricant (silicon-based)
  • Vacuum Cleaner

It is vital that you remember that the items on the list presented are not really expensive. So, you shouldn’t have a hard time getting the supplies you need.

Sliding Glass Door Maintenance

If you have been paying attention, you will probably notice that your sliding glass door has a track. This crucial element essentially acts as your door’s guide, allowing its roller wheels to ensure that the door is able to slide smoothly. However, as time goes by, these tracks will need a bit of maintenance. Like with the glass itself, dirt and grime can accumulate along the door’s tracks. If enough dirt accumulates then you may have a harder time using your door.

Luckily, there is a simple solution to this. First, take your wire brush and clean the inside of the track. Make sure that you get all of the buildup. This may be a bit harder to do if you haven’t done it in a long while. When you get everything cleared up, take your vacuum and let it get rid of the remaining dust accumulated along the track.

Cleaning the track is only the first step. Now, you need to ensure that it is properly lubricated. It is pretty straightforward so you should not have a hard time doing it. Simply take your WD-40 or any lubricant of your choice and spray it along the entire track. It is paramount that you ensure every inch of the track is covered. Just remember to make sure that you clean everything up if you accidentally spill some of the lubricant on the floor. It can be quite slippery and you would not want any accidents happening.

The state of your sliding glass door track is paramount if you want to ensure that your door remains functional. After all, you probably got this door installed for practical purposes as well as aesthetic ones. Of course, if you feel that you are not up to the task then you can always give Arcadia Sliding Glass Doors Replacement Parts and Services a call.